Mr.Phaneendra Seshabattar published a paper on “IoT and Deep Learning based
Smart Greenhouse Disease Prediction” 2021 International Conference on Recent Trends on Electronics,
Information, Communication & Technology (RTEICT), DOI: 10.1109/RTEICT52294.2021.9573794.
Mr. S. RAMAKRISHNA Published paper on “Evaluation of Multiple Responces Using Taguchi
Method for Hand Turning of HE30 (AA6082)” International Journal of Management, Technology and Engineering,
Valume: 09, Issue: III, March -2019.
Dr. V.VIKRAM REDDY Published paper on “Optimization of Weld Parameters of
Resistance Spot Welding Using Taguchi Method” in ETME; 9th -10th January, 2019.
Dr.V.VIKRAM REDDY Published a paper on “Analysis and Optimization of Process Parameters
during Hard Turning.” in National conference on Emerging Trends in Mechanical Engineering, January 2019.
Dr. V. VIKRAM REDDY Published paper on “Evaluation of Multiple Responces Using Taguchi Method
for Hand Turning of HE30 (AA6082)” in ICRMIET 2019.
Mr. S. Phaneendra Published paper on “Evaluation of Multiple Responces Using Taguchi
Method for Hand Turning of HE30 (AA6082)” in ICRMIET 2019.
Mr. D.VENKATARRAMANAIAH Published paper on “Fracture and Fatigue a Composite
Journal Bearing at Different Eccentricity and L/D Rations” in International
Journal of Research ISSN: 2236-6124, Volume 07; Issue 11; November 2018.
Dr. V. VIKRAM REDDY Published paper on “Fracture and fatigue analysis of a composite
journal bearing at different eccentricity and L/D ratios” in International Journal
of Research ISSN: 2236-6124, Volume 07; Issue 11; November 2018.
Dr. V. VIKRAM REDDY Published paper on “Fracture, fatigue growth rate and
vibration analysis of cam shafts used in railways” in International Journal
of Research ISSN: 2236-6124, Volume 07; Issue 11; November 2018.
Dr.V.S.HARIHARAN Published paper on “Fracture, fatiuge growth rate and vibration analysis of
cam shafts used in railways” in International journal of research ISSN: 2236-6124, Volume 07;
Issue 11; November 2018.
Dr. V. VIKRAM REDDY Published paper on “Application of TOPSIS with Taguchi Method for Multi-Attribute
Optimization of Machining Parameters in EDM” in SAE International ISSN: 0148-7191; 09 July 2018.
Dr.V.VIKRAM REDDY Published a paper on “Application of TOPSIS with Taguchi Method for Multi-Attribute
Optimization of Machining Parameters in EDM” in SAE International Journal, Tuesday, July 10, 2018-28-0033, 2018.
Dr. VIKRAM REDDY Published a paper on “ Effect of Various Powders added in to the dielectric fluids
on MRR and SR during PMEDM of RENE80” in International Journal of Pure and Applied Mathematics
,ISSN: 1314-3395 (on-line version),Volume 118 No. 24 2018, April 17, 2018.
Dr.V.S.HARIHARAN Published paper on “Design and Analysis of Axial Flow Compressor Blade Using Different
Aspect Ratios with Different Materials” in International Journal of Engineering Research in
Mechanical and Civil Engineering ISSN: 2456-1290, Volume 03; Issue 02; February 2018.
Dr. R.MURUGAN Published paper on “Efficient Automation of Enhanced Process of Nitrogen Generation
Plant Using Psa Principle by Using Plc & Scada” in International Journal of Engineering Research
in Mechanical and Civil Engineering ISSN: 2456-1290, Volume 03; Issue 02; February 2018.
Mr. S.PHANEENDRA Published paper on “Apply of Hydro Forming for Futuristic Manufacturing” in
International Journal of Engineering Research in Mechanical and Civil Engineering, ISSN:
2456-1290, Volume 3; Issue 2; February 2018.
Mr. S.PHANEENDRA Published paper on “Foreign Direct Investment: It’s Impact on Developing
Countries Economy - A Study of India” in International Journal of Engineering Research in
Electronics and Communication Engineering, ISSN: 2394-6849, Volume 3; Issue 2; February 2018.
Mr. NAVEEN KUMAR.A Published paper on “Mechanical Characterization of Fiber Reinforced Glass
Epoxy Hybrid Composite” in International Journal of Engineering Research in Mechanical
and Civil Engineering, ISSN: 2456-1290, Volume 3; Issue 2; February 2018; Page No. 78-83
Mr. T.SITARAMBABU Published paper on “Efficient Automation of Enhanced Process of Nitrogen
Generation Plant Using Psa Principle by Using Plc & Scada” in International Journal of
Engineering Research in Mechanical and Civil Engineering ISSN: 2456-1290, Volume 03; Issue 02; February 2018.
Dr. V.VIKRAM REDDY published a paper on “Optimization of Electrical Discharge Machining of
Titanium Alloy (Ti-6Al-4 V) Using Taguchi-DEAR Method” in SAE Technical Paper 2018-28-0032, 2018.
Mr. S.PHANEENDRA Published paper on “Design and Analysis of Centrifugal Pump by using CFD” in
International Journal for Scientific Research & Development, ISSN: 2321-0613, Volume 5; Issue 10; 2018.
Mr. G.LINGAIAH Published paper on “Performance of Cylindrical Parabolic Collector with
Automated Tracking System” in Applied Solar Energy, ISSN 0003-701X Volume 54, 2018.
Mr. S.PHANEENDRA Published paper on “A Performance CFD Investigation of Steam Ejector
with Different Nozzle Diameter” in International Journal of Research, ISSN: 2348-795X,
Volume 4; Issue 17; December 2017.
Mr. V.DEVENDER Published paper on “Performance Evaluation of friction stir
welding of dissimilar materials” in International journal of research ISSN:
2348-6848, Volume 04; Issue 17; December 2017.
Mr. K.RANADHEER RAJU Published paper on “An Effective Overview to a Homogeneous Charge
Compression Ignition Engine” in International Journal of Research, ISSN: 2348-795X,
Volume 4; Issue 17; December 2017.
Mr. S.SUNIL Published paper on “Analytical Investigation of Solar Collectors by Using FEA”
in International Journal for innovative engineering and management research, ISSN: 2456
– 5083, Volume 6; Issue 10; November 2017; Page No 587-594.
Mr. S.SUNIL Published paper on “Heat Transfer Characteristics of Parabolic Solar
Trough by Using FEA” in International Journal for innovative engineering
and management research, ISSN: 2456 – 5083, Volume 6; Issue 11; November 2017; Page No 364-370.
Dr. V.VIKRAM REDDY published a paper on “Optimization of multiple performance characteristics in EDM
of Titanium alloy using GRA” in International journal for research and development in technology,
Vol 8, Issue 1, July 2017, pp 52-57.
Dr. V.VIKRAM REDDY Published a paper on “Fabrication and experimental analysis of epoxy-glass
fiber composite leaf spring” in SAE Technical paper, 2017-28-1985, 2017.
Dr. V.VIKRAM REDDY Published a paper on “Fabrication and experimental analysis of epoxy-glass
fiber composite leaf spring” in SAE Technical paper, 2017-28-1985, 2017.
Dr.V.VIKRAM REDDY Published a paper on “Experimental investigation on EDM of Titanium alloy
using Taguchi method” in International journal for scientific research and development,
Vol 5, Issue 5, 2017 , pp 134-139.
Dr. V.VIKRAM REDDY Published a paper on “Optimization of process parameters during EDM of SS304
using Taguchi –Grey relational methods analysis” in proceedings in International conference
on advances in materials & manufacturing (ICAMM-2016) vol 2 December 8-10-2016,pp 323-329.
Ms. NUSRATH FATHIMA and Mr. D. VENKATARRAMANAIAH Published paper on “Fracture Analysis on Weld
Joint of Pressure Vessel” in International Journal of Current Engineering and Technology
ISSN: 2277-4106, Volume 06; October 2016; Page No 1618-1624.
Mr. S.RAMAKRISHNA Published paper on “Influence of Bending Process Parameters and Heat Treatment
Methods on Springback of AISI 1026 Steel” in International Conference on Emerging Trends in Mechanical
Engineering, ICETiME’ September 28-29th 2016.
Dr. V. VIKRAM REDDY Published paper on “Multi Response Optimization of EDM of AA6082 Material
using Taguchi- DEAR Method” in International Journal of Scientific & Engineering Research,
ISSN 2229-5518 Volume 7, Issue 6, June-2016,pp 215-219.
Dr.V.S.HARIHARAN Published paper on “Modelling and Analysis of Automotive Wheel Rim” in
International Journal of Innovative Research in Science ISSN: 2347-6710, Volume 05; Issue 04; April 2016.
Dr.V.S.HARIHARAN Published paper on “Modelling and Analysis of Disc Brake Rotor under Various
Loading Conditions” in International Journal of Innovative Research in Science ISSN: 2347-6710,
Volume 05; Issue 04; April 2016.
Ms. M.BHAVANI Published paper on “Modelling and Analysis of Disc Brake Rotor under Various
Loading Conditions” in International Journal of Innovative Research in Science, Engineering
and Technology ISSN 2347-6710 Volume 5, Issue 4, April-2016.
Mr. D.VENKATARRAMANAIAH Published paper on “Investigation of Fatigue crack growth in
Aerospace Bracket Using FEA” in International Journal of Innovation in Science,
Engineering and Technology ISSN: 2319-8753, Volume 05; Issue 03; March 2016.
Mr. S.PHANEENDRA Published paper on “Design and analysis of plastic Mould for a hand guard”
in International Journal of Advanced Research and Development, ISSN: 2455-4030, Volume 1;
Issue 2; February 2016; Page No. 01-05.
Mr. S.PHANEENDRA Published paper on “Fabrication and analysis of Kenaf fibre reinforced composite”
in International Journal of Advanced Research and Development, ISSN: 2455-4030, Volume 1; Issue 1;
January 2016; Page No. 27-29.
Dr. V.VIKRAM REDDY Published a paper on “Influence of Process Parameters on Performance Characteristics
during EDM of Aluminum Alloy 6082” in International Journal of Engineering Research and Technology,
ISSN:2278-0181 ,Vol.5, Issue 01, January 2016, pp 211-216.
Dr. V.VIKRAM REDDY Published a paper on “Optimization of Process Parameters during EDM of Stainless
Steel 304 using Taguchi Method” in International Journal of Engineering Trends and Technology,
ISSN:2231-5381,Vol.31, No.2, January 2016,pp 106-114.
Dr. V.VIKRAM REDDY Published a paper on “Mathematical Modeling and Analysis of Influence of
Process Parameters on MRR during EDM of Stainless Steel 304” in IOSR Journal of Mechanical
and Civil Engineering (IOSR-JMCE), e-ISSN: 2278-1684,p-ISSN: 2320-334X ,Volume 13, Issue
1 Ver. III (Jan. - Feb. 2016), PP 44-55.
Dr.V.VIKRAM REDDY Published a paper on “Multi-Objective Optimization of Parameters
during EDM of Aluminum Alloy 6082 using Grey Relational Analysis” in International
Journal of Latest Trends in Engineering and Technology, ISSN: 2278-621X, Vol.6, Issue 3,
January 2016, pp 570-576.
Dr .V.VIKRAM REDDY Published a paper on “ CFD analysis of shell and tube heat exchanger
using titanium carbide, titanium nitride and zinc oxide nano fluids” in International
journal of innovations in engineering and technology”, special issue NCRTEEFOSS-2016,pp 315-322.
Dr .V.VIKRAM REDDY Published a paper on “Optimization of Process Parameters of Surfactant
and Graphite Powder mixed Dielectric EDM through Taguchi - Grey Relational Analysis” in
International Journal of Industrial Engineering and Management Science, ISSN: 2277-5056,
Vol.5, No.4, December 2015, pp 175-180.
Mr. D.VENKATARRAMANAIAH Published paper on “3D Mixed Mode Fracture Analysis on Composite
Materials by Using FEA” in International Journal of Research in Engineering and Technology
ISSN: 2319-1163, Volume 04; Issue 08; August 2015.
Mr. T.SITARAMBABU Published paper on “Structural Analysis of 3D Carbon-Silicon Carbide Composites”
in International Journal of Current Engineering and Technology, ISSN: 2347 – 5161, Volume 5; Issue
4; August 2015.
Mr. D. VENKATARRAMANAIAH Published paper on “Experimental Investigation on NACA 6613 for
car Rear Wing using Fibre Reinforced Composites” in International Journal of Emerging
Technology on Advanced Engineering ISSN: 2250-2759, Volume 05; Issue 07; July 2015; Page No. 178-183.
Mr.D.VENKATARRAMANAIAH Published paper on “Fracture Analysis on Weld Joint of Pressure Vessel”
in International Journal of Current Engineering and Technology ISSN: 2277-4106, Volume 06;
Issue 07; July 2015; Page No. 178-183.
Mr. D. VENKATARRAMANAIAH Published paper on “Fracture Impact Analysis of Frontal Car Bumper
using long Fibre Reinforced Thermoplastics” in International Journal of Current Engineering
and Technology ISSN: 2277-4106, Volume 05; June 2015.
Dr.V.VIKRAM REDDY Published a paper on “Micro Hardness Measurements on Machined Surface
of PHl7-4 Stainless Steel during EDM with Surfactant and Graphite Powder Mixed Dielectric”
in Journal of Material Science and Mechanical Engineering (JMSME), Print ISSN: 2393-9095;
Online ISSN: 2393-9109; Volume 2, Number 3; April-June, 2015, pp. 243-247.
Dr.V.VIKRAM REDDY Published a paper on “Multi-objective optimization of electrical discharge
machining of PH17-4 stainless steel with surfactant-mixed and graphite powder–mixed dielectric
using Taguchi-data envelopment analysis–based ranking method” in Proceedings of the Institution
of Mechanical Engineers, Part B: Journal of Engineering Manufacture vol. 229 no. 3, March 2015,pp487-494.
Mr. T.SITARAMBABU Published paper on “Analysis and Optimization of Process Parameters
during Hard Turning” in emerging trends in mechanical engineering; 9th – 10th January 2015.
Dr. V. VIKRAM REDDY Published paper on “Analysis and Optimization of Process Parameters
during Hard Turning” in emerging trends in mechanical engineering; 9th – 10th January 2015.
Dr. V.VIKRAM REDDY Published a paper on “Influence of surfactant and graphite powder concentration
on electrical discharge machining of PH17-4 stainless steel” in Journal of the Brazilian Society
of Mechanical Sciences and Engineering ISSN 1678-5878 Volume 37 Number 2, 2015,pp641-655.
Dr. V.VIKRAM REDDY Published a paper on “Influence of Process Parameters on Characteristics
of Electrical Discharge Machining of PH17-4 Stainless Steel” in Journal of Advanced Manufacturing
Systems Vol. 14, No. 3, 2015, pp 189–202.
Mr. V.VIKRAM REDDY Published a paper on “Mathematical Modeling of Process Parameters
on Material Removal Rate in EDM of EN31 Steel using RSM Approach” in International Journal
of Research and Innovations in Science & Technology, ISSN 2394-3866, pp1-5,2014.
Mr. V. VIKRAM REDDY Published a paper on “Influence of Process Parameters on Electrical
Discharge Machining of PH17-4 Stainless Steel” in Proceedings in international conference
on Advance Research and Innovations in Mechanical, Material Science, Industrial Engineering
and Management - ICARMMIEM-2014, , ISBN 978-93-82338-97-0 (2014), pp 16-19.
Dr.S. MOHANA MURUGAN Published paper on “Emission and Combustion Characteristics
of Different Fuels in a HCCI Engine” in International Journal of Automotive and Mechanical
Engineering ISSN: 2229-8649, Volume 03; January-June 2011.
Mr.V.VIKRAM REDDY published a paper on “The effect of Process parameters on Machining
of EN-31 Tool Steel through Rotary EDM” in International Journal of Industrial Engineering
and Technology, ISSN 0974-3416 Volume 3, Number 1, 2011, pp. 36-53.
Dr. R.MURUGAN Published paper on “A Novel Device to Measure Instantaneous Swept Volume
of Internal Combustion Engines” in Global Journal of Researches in Engineering,
Volume 10; Issue 07; December 2010; Page no 47-51.
Mr.V. VIKRAM REDDY published a paper on “Optimization of the EDM parameters on machining EN-31
Using Taguchi Method” in proceedings of the IV National Conference on Trends in Mechanical
Engineering TIME 10, 30th Dec. 2010.
Mr.V. VIKRAM REDDY published a paper on “Rigidity Analysis of Drive Shaft Bearing
of Standard Four Wheeler” in National conference on Design for Product Life Cycle, Feb. 17-18, 2006.
Mr.V.VIKRAM REDDY published a paper on “Rigidity Analysis of Lathe Headstock Spindle” in
proceedings of All India Seminar on Resent Advances in Manufacturing Technologies October
22-23, 2005, NIT, Rourkee.
Mr.V.VIKRAM REDDY Published a paper on “Taguchi approach to design optimization for quality
and cost” in proceedings of Second National Conference TIME – 2004.
Mr. S.PHANEENDRA Published paper on “Entrepreneur, Entrepreneurship, And Entrepreneurship
Education within India’s Education System” in International Journal of Research and Current Development.
Mr. S.MOHANAMURUGAN Published paper on “Tuning of a conventional diesel engine into a low compression
ratio diesel engine” in International Journal of Applied Engineering Research.
Dr. R.MURUGAN Published paper on “Energy efficient drinking water purification system
using TiO2 solar reactor with traditional methods” in Materials today, Volume 05; Issue 01; Pages 415-421.
Mr. P. ABHILASH Published paper on “Performance Analysis of Two Stroke Petrol Engine on Basis of
Variation in Carburettor Main Jet Diameter” in International Conference on Future Technologies
in Mechanical Engineering.
